RAM TRUCK 2500 2010 Owner's Manual download pdf (Page 48)

• To install the bed extender into the

storage position, perform the

following:

• Make sure the center handle is

unlocked using the vehicle key and

rotate the center handle vertically

to release the extender side gates.

• With the side gates open, position

the extender fully forward in the

bed against the front panel.

• Rotate the side gates closed

allowing the outboard ends to be

positioned in front of the cargo

tie-down loops.

• Rotate the center handle

horizontally to secure the side

gates in the closed position.

• Lock the center handle using the

vehicle key to secure the panel into

place and assist against theft.

Divider Position

• There are 11 divider slots along the

bed inner panels which allow for

various positions to assist in

managing your cargo.

• To install the bed extender into a

divider position perform the

following:

• Make sure the center handle is

unlocked using the vehicle key and

rotate the center handle vertically

to release the extender side gates.

• With the side gates open, position

the extender so the outboard ends

align with the intended slots in the

sides of the bed.

• Rotate the side gates closed so

that the outboard ends are secured

into the intended slots of the bed.

• Rotate the center handle

horizontally to secure the side

gates in the closed position.

• Lock the center handle to secure

the panel into place and assist

against theft.

Extender Position

• The bed extender will add an

additional 15 in (38 cm) in the back of

the truck when additional cargo room

is needed.

• To install the bed extender into the

extender position, perform the

following:

• Lower the tailgate.

• Make sure the center handle is

unlocked and rotate the center

handle vertically in order to release

the extender side gates.

• Fit the end of the side gate ends

onto the pin and handle.

• Rotate the handles to the

horizontal position to secure into

place.

WARNING!

To reduce the risk of potential injury

or property damage:

• Cargo must be secured.

• Do not exceed cargo load rating of

your vehicle.

• Secure all loads to truck utilizing

cargo tie-downs.

• Extender should not be used as

cargo tie-down.

• When vehicle is in motion do not

exceed 150 lbs (68 kg) load on the

tailgate.

• The bed extender is not intended

for off road use.

• When not in use, the

extender/divider should be in

stowed or divider position with the

tailgate closed.

• When in use, all handles are to be

in the locked position.

UTILITY

46

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

Comments to this Manuals

No comments